Medicine Bottle Making Machine,Blow Molding Machine

CLASSIC SERIES MEDICINE BOTTLE MAKING MACHINE

This series automatic blow molding machine is easy to operate, one person can operate multi-machine at the same time. It’s cost-effective and works stably. 1 cavity, 2 cavities, 3 cavities, 4 cavities, 6 cavities are available. Optional for stretch servo and clamping servo, and air recycling system. The blowing machine capacity is 1200BPH-7200BPH.

HIGH SPEED PET BLOWING MACHINE

The servo high-speed series automatic bottle blowing machine adopts the design of rotating preforms feeding, the bottle mouth is upward, and the preforms are heated centrally to save space, the machine runs stably with high output, it’s easy to operate. At present, there are 5 models with 4, 5, 6, and 8 cavities, which can produce up to 2.5 liters of PET bottles and the maximum output can reach 12,000 bottles per hour.

mineral water bottle making machine high speed servo

Bravan pet stretch blow molding machine can produce many kind of PET clear bottles and with master batch bottles, such as chemical bottles, medical bottles, pesticide bottles

To Home Page

Contact Us

SPECIFICATION

Automatic Medicine Bottle Making Machine

		Unit	BR-8U0.6L	BR-8C0.6L	BR-6C1.5L	BR-6C0.6L	BR-4C2L
CONTAINER	Number of cavities	CAV	8	8	6	6	4
	Max.Container Volume	L	0.06-0.6	0.06-0.6	1.5	0.06-0.6	0.25-2
	Max.inlet outer Dia.	mm	38	38	30	38	38
	Max.Container Dia.	mm	60	65	92	65	105
	Max.Container height	mm	250	250	350	250	330
	Theoretical Output	B.P.H	12000（*）	9000（*）	8000(*)	7200(*)	4000(*)
POWER	Max.heating power	KW	120	48	125	36	60
	Motor power	KW	13	15	13	3.5	3.5
	Total Power	KW	133	63	138	39.5	63.5
AIR SYSTEM	Operating pressure	Bar	7	7	7	7	7
	Low pressure consumption	L/min	500	1000	500	1600	1600
	Blowing pressure	Bar	35	35	35	35	35
	High pressure consumption	L/min	6500（*）	5200（*）	9800(*)	3300(*)	6500(*)
MOULD	Operating pressure	Bar	3-5	3	3-5	3	3
	Temperature range	ºC	——	41194	40463	41194	40463
OVEN	Operating pressure	Bar	3-5	3	3-5	3	3
	Temperature range	ºC	20-25	20-25	20-25	20-25	20-25
COOLING WATER	Flow rate	L/min	60	50	60	50	40
	Cooling Capacity	Kcal/hr	5	5	5	——
MACHINE	Size(LxWxH)	M	5.81.82.3	4.222.2	4.3×2×2.3	3.62.2*2	3.6×2×2.3
	Weight	kg	8500	7000	8500	5500	6000

		Unit	BR-4C0.6L	BR-3C2L	BR-3C0.6L	BR-2C1.5L	BR-1C20L	BR-1C10L
CONTAINER	Max.Container volume	L	0.6	2	0.6	1.5	20	10
	Max.inlet outer diameter	mm	38	38	38	38	90	55
	Max.Container diameter	mm	105	105	65	105	290	210
	Max.Container height	mm	335	335	240	335	480	430
	Number of cavities	cav	4	3	3	2	1	1
	Theoretical output	bph	4000(*)	3000(*)	3200(*)	2000(*)	600(*)	700（*）
ELECTRICAL	Installed power	Kw	63	63	43	63	75	31
	Max.heating power	Kw	60	60	40	60	72	30
COMPRESSED AIR	Operating pressure	Mpa	0.7	0.7	0.7	0.7	0.8	0.8
	Low pressure air consuming	L/min	1400	1400	1400	1400	1000	800
	Blowing pressure	Mpa	3.5	3.5	3.5	3.5	35	3
	High pressure air consuming	L/min	3000-5000(**)	3000-5000(**)	1500-2000(**)	2500-3500(**)	6000(*)	4000
CHILLER WATER	Pressure	Mpa	0.3-0.5	0.3-0.5	0.3-0.5	0.3-0.5	0.4-0.5	0.4
	Temperature	℃	10-12	10-12	10-12	10-12	10-20	10-20
	Flow rate	L/min	30	30	30	30	100	100
MACHINE DIMENSION	Size(L×W×H)	M	3.12×2.27×2.03	3.12×2.27×2.03	2.56×2.12×2.03	3.45×2.23×2.03	3.6×1.7×2.5	2.5×1.5×2
	Weight	kg	3550	3550	3000	3500	3700	2200

Note: The actual output speed depends on the bottle shape and preform.

SPECIFICATION

For Semi-automatic Medicine Bottle Making Machine

(view the complete form, try to rotate the phone.)

	Unit	BR-2M2L	BR-1M5L	BR-1M20L
Cavity	cav	2	1	1
Min.pruduct capacity	L	0.03	0.03	8
Max.pruduct capacity	L	2	5	20
Min.inner neck diameter	mm	15	15	55
Max.innerrneck diameter	mm	90	120	55
Max.pruduct diameter	mm	125	170	300
Max.prudcut height	mm	330	330	520
Theoratical output	BPH	600	250	60
Operating pressure	Mpa	0.7	0.7	0.7
Blowing pressure	Mpa	1-3	1-3	1-3
Heater power	KW	8	8	11.2
Machine weight	KG	650	650	1700
Heater power	KG	280	280	440
Machine dimension(L×W×H)	M	1.7×0.6×2.2	1.7×0.6×2.2	2.8×0.8×2.05
Heater dimension(L×W×H)	M	1.38×0.88×1.25	1.38×0.88×1.25	2.1×0.63×1.75

Note: The actual output speed depends on the bottle shape and preform.

FEATURE

Preform conveyor equipped with sliding wheels,precise orientation,stable and reliable.
Operation panel by touch LCD,friendly interface and easy operation.
Layered preform heating system,easy temperature regulation,uniform heating effect to improve blow moulding result to the utmost.
5-pront double toggle clamping unit by optimized design for higher clamping force and speed.
Equipped with automatic alarm device and automatic fault detection device.
Optional for HP air recovery device to spare LP air for machine moving.
Option for air conveyer system for bottle exit.

PACKAGE & SHIPMENT

EXHIBITION